VAR1:=EMA(EMA(CLOSE,13),13);
控盘:= (VAR1-REF(VAR1,1))/REF(VAR1,1)*1000,COLORFFCCCC,POINTDOT;
 STICKLINE(控盘<0,控盘,0,2,0),COLORWHITE;
无庄控盘:控盘<0,COLORWHITE;
 STICKLINE(控盘>REF(控盘,1) AND 控盘>0,控盘,0,2,1),COLORRED;
有庄控盘: 控盘>REF(控盘,1) AND 控盘>0,COLORRED;
 VAR2:=100*WINNER(CLOSE*0.95);
 STICKLINE(控盘0,控盘,0,2,0),COLOR00FF00;
主力出货: 控盘0,COLOR00FF00;
 STICKLINE(VAR2>50 AND COST(85)0,控盘,0,2,0),COLORFF00FF;
高度控盘: VAR2>50 AND COST(85)0,COLORFF00FF;
 A10:=CROSS(控盘,0);
开始控盘:IF(A10,6,0),COLORYELLOW;
控盘天数:BARSLASTCOUNT(有庄控盘 OR 高度控盘 ),LINETHICK0,COLORWHITE;
出货天数:BARSLASTCOUNT(主力出货),LINETHICK0,COLORWHITE;
 WY1001:=(2*CLOSE+HIGH+LOW)/4;
 WY1002:=EMA(WY1001,4);
 WY1003:=EMA(WY1002,4);
 WY1004:=EMA(WY1003,4);
 X:=(WY1004-REF(WY1004,1))/REF(WY1004,1)*2000;
 X1:=IF(X
 XO:=MA(X,2),COLOR9932CD;
 SI:=REF(X,1);
 DIF1:=EMA(DCLOSE,12)-EMA(DCLOSE,26);
 DEA1:=EMA(DIF1,9);
 {柱状线}
MACD1:=(DIF1-DEA1)*2*60;
 MACD上:IF(MACD1>REF(MACD1,1),MACD1,DRAWNULL),
 STICK,COLORRED,LINETHICK1;
 MACD下:IF(MACD1
 STICK,COLORFF9900,LINETHICK1;
低位金叉:=CROSS(DIF1,DEA1) AND DIF1<-0.1;
 DRAWTEXT(低位金叉,-8,' 低位金叉'),COLORRED;
 JCCOUNT:=COUNT(CROSS(DIF1,DEA1),BARSLAST(DEA1>=0));
二次金叉:=CROSS(DIF1,DEA1) AND DEA1<0 AND COUNT(JCCOUNT=2,21)=1;
 DRAWICON(二次金叉,DEA1*1.04,13) ;
 DRAWTEXT(二次金叉,-3,' 二次金叉'),COLORFF00FF;
 A101:=BARSLAST(REF(CROSS(DIF1,DEA1),1));
底背离:=REF(CLOSE,A101+1)>CLOSE AND DIF1>REF(DIF1,A101+1) AND CROSS(DIF1,DEA1);
 DRAWICON(底背离,-5,1);
 DRAWTEXT(底背离,-0.50,' 底背离'),COLORYELLOW;
 A20:=BARSLAST(REF(CROSS(DEA1,DIF1),1));
顶背离:=REF(CLOSE,A20+1)DIF1 AND CROSS(DEA1,DIF1);
 DRAWTEXT(顶背离,30,' 顶背离'),COLORGREEN;
 DRAWICON(顶背离,30,2);

 SG:=EMA(HHV(HIGH,1),8);
 XA1:=EMA(CLOSE,8);
 X30:=((XA1 < REF(XA1,1)) AND (CLOSE < XA1));
 X31:=IF(((SG < REF(SG,1)) OR X30),1,0);
全仓出击:=((((COUNT((X31 = 1),4) = 3) AND (X31 = 0)) AND (((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) > 0.085)) * 89);
 STICKLINE(全仓出击,66,0,3,0),COLORFF00FF;
 DRAWICON((全仓出击 >= 89),67,1);
 DRAWTEXT((全仓出击 >= 89),69,'*大胆杀入');

大胆出击的选股源码，可以做预警。
SG:=EMA(HHV(HIGH,1),8);
 X1:=EMA(CLOSE,8);
 X30:=((X1 < REF(X1,1)) AND (CLOSE < X1));
 X31:=IF(((SG < REF(SG,1)) OR X30),1,0);
全仓出击:((((COUNT((X31 = 1),4) = 3) AND (X31 = 0)) AND (((CLOSE - REF(CLOSE,1)) / REF(CLOSE,1)) > 0.085)) * 89);