有朋友反应我前面发的指标不能通过，好像直接贴源码操作符会乱，现在将完整指标源码发出
 不对也不是完整的，抓板信号要你自己去完善，呵呵不用加别的指标进来，只需本指标中的
 几条线之间的关系弄明白加进去，抓强势股不错
 
E1:=MA(BETA(13)/100*C+C,13);
 E2:EMA(BETA(13)/100*C+C,13),DOTLINE;
 E3:SMA(BETA(13)/100*C+C,13,1),DOTLINE;
 E4:SMA(L,RELATE(C,V,13)*100,1 );
 E5:=DMA(BETA(13)/100*C+C,13);
 DRAWTEXT(CROSS(E2,E1) AND E3>E1 ,L*0.97,'进'),COLORYELLOW ;
 CB:=(C -REF(C ,1))/REF(C,1);
 VB:=(V-REF(V,1))/REF(V,1);
 CV:=VB/CB,VOLSTICK;
 N:=SUMBARS((C-REF(C,1))/REF(C,1),0.3);
FV:=SLOPE(EMA(CV,7),7);
FC:=EMA(FV,5);
 LY:=  CROSS(FV ,FC)  ;
 HY:REF(L,BARSLAST(LY)),COLORMAGENTA;
 BY:REF(L,BARSLAST(CROSS(FC ,FV) )),COLORYELLOW;
 突破:=REF(EMA(BETA(13)/100*C+C,14),1);
 A1X:=(EMA(BETA(13)/100*C+C,10)-突破)/突破*100;
 多方:=IF(A1X>=0,REF(EMA(BETA(13)/100*C+C,10),BARSLAST(CROSS(A1X,0))+1),DRAWNULL);
 空方:=IF(A1X<0,REF(EMA(BETA(13)/100*C+C,10),BARSLAST(CROSS(0,A1X))+1),DRAWNULL);
 DRAWLINE(A1X>=0,EMA(BETA(13)/100*C+C,10) ,A1X<0,EMA(BETA(13)/100*C+C,10) ,0),COLORBLUE;
 DRAWLINE(A1X<0,EMA(BETA(13)/100*C+C,10) ,A1X>=0,EMA(BETA(13)/100*C+C,10) ,0),COLORRED;
 BB1:=ATAN(突破-多方 )*180/3.1416; 
DRAWTEXT(CROSS(E2,E3)  AND BB1>1.5,L*0.97,'加'),COLORYELLOW ;
 DRAWTEXT(BB1>5 AND BB1<35 AND C>E3  ,H*1.01,'板'); {自己优化}